Interface IterableOfProtosFluentAssertion<M extends Message>

  • All Superinterfaces:
    IterableOfProtosUsingCorrespondence<M>

    public interface IterableOfProtosFluentAssertion<M extends Message>
    extends IterableOfProtosUsingCorrespondence<M>
    Fluent API to perform detailed, customizable comparison of iterables of protocol buffers. The same comparison rules are applied to all pairs of protocol buffers which get compared.

    Methods may be chained in any order, but the chain should terminate with a method from IterableOfProtosUsingCorrespondence.

    The state of an IterableOfProtosFluentAssertion object after each method is called is left undefined. Users should not retain references to IterableOfProtosFluentAssertion instances.

    • Method Detail

      • ignoringFieldAbsence

        IterableOfProtosFluentAssertion<M> ignoringFieldAbsence()
        Specifies that the 'has' bit of individual fields should be ignored when comparing for equality.

        For version 2 Protocol Buffers, this setting determines whether two protos with the same value for a field compare equal if one explicitly sets the value, and the other merely implicitly uses the schema-defined default. This setting also determines whether unknown fields should be considered in the comparison. By ignoringFieldAbsence(), unknown fields are ignored, and value-equal fields as specified above are considered equal.

        For version 3 Protocol Buffers, this setting does not affect primitive fields, because their default value is indistinguishable from unset.

      • ignoringFieldAbsenceOfFields

        IterableOfProtosFluentAssertion<M> ignoringFieldAbsenceOfFields​(int firstFieldNumber,
                                                                        int... rest)
        Specifies that the 'has' bit of these explicitly specified top-level field numbers should be ignored when comparing for equality. Sub-fields must be specified explicitly (via Descriptors.FieldDescriptor) if they are to be ignored as well.

        Use ignoringFieldAbsence() instead to ignore the 'has' bit for all fields.

        See Also:
        for details
      • ignoringRepeatedFieldOrder

        IterableOfProtosFluentAssertion<M> ignoringRepeatedFieldOrder()
        Specifies that the ordering of repeated fields, at all levels, should be ignored when comparing for equality.

        This setting applies to all repeated fields recursively, but it does not ignore structure. For example, with ignoringRepeatedFieldOrder(), a repeated int32 field bar, set inside a repeated message field foo, the following protos will all compare equal:

        
         message1: {
           foo: {
             bar: 1
             bar: 2
           }
           foo: {
             bar: 3
             bar: 4
           }
         }
        
         message2: {
           foo: {
             bar: 2
             bar: 1
           }
           foo: {
             bar: 4
             bar: 3
           }
         }
        
         message3: {
           foo: {
             bar: 4
             bar: 3
           }
           foo: {
             bar: 2
             bar: 1
           }
         }
         

        However, the following message will compare equal to none of these:

        
         message4: {
           foo: {
             bar: 1
             bar: 3
           }
           foo: {
             bar: 2
             bar: 4
           }
         }
         

        This setting does not apply to map fields, for which field order is always ignored. The serialization order of map fields is undefined, and it may change from runtime to runtime.

      • ignoringRepeatedFieldOrderOfFields

        IterableOfProtosFluentAssertion<M> ignoringRepeatedFieldOrderOfFields​(int firstFieldNumber,
                                                                              int... rest)
        Specifies that the ordering of repeated fields for these explicitly specified top-level field numbers should be ignored when comparing for equality. Sub-fields must be specified explicitly (via Descriptors.FieldDescriptor) if their orders are to be ignored as well.

        Use ignoringRepeatedFieldOrder() instead to ignore order for all fields.

        See Also:
        for details.
      • ignoringExtraRepeatedFieldElements

        IterableOfProtosFluentAssertion<M> ignoringExtraRepeatedFieldElements()
        Specifies that, for all repeated and map fields, any elements in the 'actual' proto which are not found in the 'expected' proto are ignored, with the exception of fields in the expected proto which are empty. To ignore empty repeated fields as well, use comparingExpectedFieldsOnly().

        This rule is applied independently from ignoringRepeatedFieldOrder(). If ignoring repeated field order AND extra repeated field elements, all that is tested is that the expected elements comprise a subset of the actual elements. If not ignoring repeated field order, but still ignoring extra repeated field elements, the actual elements must contain a subsequence that matches the expected elements for the test to pass. (The subsequence rule does not apply to Map fields, which are always compared by key.)

      • usingDoubleTolerance

        IterableOfProtosFluentAssertion<M> usingDoubleTolerance​(double tolerance)
        Compares double fields as equal if they are both finite and their absolute difference is less than or equal to tolerance.
        Parameters:
        tolerance - A finite, non-negative tolerance.
      • usingDoubleToleranceForFields

        IterableOfProtosFluentAssertion<M> usingDoubleToleranceForFields​(double tolerance,
                                                                         int firstFieldNumber,
                                                                         int... rest)
        Compares double fields with these explicitly specified top-level field numbers using the provided absolute tolerance.
        Parameters:
        tolerance - A finite, non-negative tolerance.
      • usingDoubleToleranceForFields

        IterableOfProtosFluentAssertion<M> usingDoubleToleranceForFields​(double tolerance,
                                                                         Iterable<Integer> fieldNumbers)
        Compares double fields with these explicitly specified top-level field numbers using the provided absolute tolerance.
        Parameters:
        tolerance - A finite, non-negative tolerance.
      • usingDoubleToleranceForFieldDescriptors

        IterableOfProtosFluentAssertion<M> usingDoubleToleranceForFieldDescriptors​(double tolerance,
                                                                                   Iterable<Descriptors.FieldDescriptor> fieldDescriptors)
        Compares double fields with these explicitly specified fields using the provided absolute tolerance.
        Parameters:
        tolerance - A finite, non-negative tolerance.
      • usingFloatTolerance

        IterableOfProtosFluentAssertion<M> usingFloatTolerance​(float tolerance)
        Compares float fields as equal if they are both finite and their absolute difference is less than or equal to tolerance.
        Parameters:
        tolerance - A finite, non-negative tolerance.
      • usingFloatToleranceForFields

        IterableOfProtosFluentAssertion<M> usingFloatToleranceForFields​(float tolerance,
                                                                        int firstFieldNumber,
                                                                        int... rest)
        Compares float fields with these explicitly specified top-level field numbers using the provided absolute tolerance.
        Parameters:
        tolerance - A finite, non-negative tolerance.
      • usingFloatToleranceForFields

        IterableOfProtosFluentAssertion<M> usingFloatToleranceForFields​(float tolerance,
                                                                        Iterable<Integer> fieldNumbers)
        Compares float fields with these explicitly specified top-level field numbers using the provided absolute tolerance.
        Parameters:
        tolerance - A finite, non-negative tolerance.
      • usingFloatToleranceForFieldDescriptors

        IterableOfProtosFluentAssertion<M> usingFloatToleranceForFieldDescriptors​(float tolerance,
                                                                                  Iterable<Descriptors.FieldDescriptor> fieldDescriptors)
        Compares float fields with these explicitly specified top-level field numbers using the provided absolute tolerance.
        Parameters:
        tolerance - A finite, non-negative tolerance.
      • comparingExpectedFieldsOnly

        IterableOfProtosFluentAssertion<M> comparingExpectedFieldsOnly()
        Limits the comparison of Protocol buffers to the fields set in the expected proto(s). When multiple protos are specified, the comparison is limited to the union of set fields in all the expected protos.

        The "expected proto(s)" are those passed to the method in IterableOfProtosUsingCorrespondence at the end of the call-chain.

        Fields not set in the expected proto(s) are ignored. In particular, proto3 fields which have their default values are ignored, as these are indistinguishable from unset fields. If you want to assert that a proto3 message has certain fields with default values, you cannot use this method.

      • ignoringFields

        IterableOfProtosFluentAssertion<M> ignoringFields​(int firstFieldNumber,
                                                          int... rest)
        Excludes the top-level message fields with the given tag numbers from the comparison.

        This method adds on any previous FieldScope related settings, overriding previous changes to ensure the specified fields are ignored recursively. All sub-fields of these field numbers are ignored, and all sub-messages of type M will also have these field numbers ignored.

        If an invalid field number is supplied, the terminal comparison operation will throw a runtime exception.

      • ignoringFields

        IterableOfProtosFluentAssertion<M> ignoringFields​(Iterable<Integer> fieldNumbers)
        Excludes the top-level message fields with the given tag numbers from the comparison.

        This method adds on any previous FieldScope related settings, overriding previous changes to ensure the specified fields are ignored recursively. All sub-fields of these field numbers are ignored, and all sub-messages of type M will also have these field numbers ignored.

        If an invalid field number is supplied, the terminal comparison operation will throw a runtime exception.

      • ignoringFieldDescriptors

        IterableOfProtosFluentAssertion<M> ignoringFieldDescriptors​(Descriptors.FieldDescriptor firstFieldDescriptor,
                                                                    Descriptors.FieldDescriptor... rest)
        Excludes all message fields matching the given Descriptors.FieldDescriptors from the comparison.

        This method adds on any previous FieldScope related settings, overriding previous changes to ensure the specified fields are ignored recursively. All sub-fields of these field descriptors are ignored, no matter where they occur in the tree.

        If a field descriptor which does not, or cannot occur in the proto structure is supplied, it is silently ignored.

      • ignoringFieldDescriptors

        IterableOfProtosFluentAssertion<M> ignoringFieldDescriptors​(Iterable<Descriptors.FieldDescriptor> fieldDescriptors)
        Excludes all message fields matching the given Descriptors.FieldDescriptors from the comparison.

        This method adds on any previous FieldScope related settings, overriding previous changes to ensure the specified fields are ignored recursively. All sub-fields of these field descriptors are ignored, no matter where they occur in the tree.

        If a field descriptor which does not, or cannot occur in the proto structure is supplied, it is silently ignored.

      • reportingMismatchesOnly

        IterableOfProtosFluentAssertion<M> reportingMismatchesOnly()
        If set, in the event of a comparison failure, the error message printed will list only those specific fields that did not match between the actual and expected values. Useful for very large protocol buffers.

        This a purely cosmetic setting, and it has no effect on the behavior of the test.

      • unpackingAnyUsing

        IterableOfProtosFluentAssertion<M> unpackingAnyUsing​(TypeRegistry typeRegistry,
                                                             ExtensionRegistry extensionRegistry)
        Specifies the TypeRegistry and ExtensionRegistry to use for Any messages.

        To compare the value of an Any message, ProtoTruth looks in the given type registry for a descriptor for the message's type URL:

        • If ProtoTruth finds a descriptor, it unpacks the value and compares it against the expected value, respecting any configuration methods used for the assertion.
        • If ProtoTruth does not find a descriptor (or if the value can't be deserialized with the descriptor), it compares the raw, serialized bytes of the expected and actual values.

        When ProtoTruth unpacks a value, it is parsing a serialized proto. That proto may contain extensions. To look up those extensions, ProtoTruth uses the provided ExtensionRegistry.

        Since:
        1.1